Combination IO Modules

4DI+4DO Remote IO Module

Item No.: M110
M110 Industrial Remote I/O Module provides 4 optical-isolated digital inputs, supports Max. 700KHz high speed pulse counter, 4 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs.
  • T Version: 1*RJ45+1RS485+4DI+4DO
  • E Version: 2*RJ45+1RS485+4DI+4DO
  • Introduction Features Specifications Download Applications
    Digital Input/Output Modules
    The BLIIoT's wide range of digital I/O modules guarantees the right module for diverse applications.
    The input/output module M110 is used for controlling digital consumer like contactors, relays, pneumatic and hydraulic valves, as well as for reading digital signals of sensors or detectors. 
    The Digital I/O M110 comes with 4 digital inputs, 4 digital outputs, and Modbus I/O, Ethernet port. 
    4DI
    Wet/Dry contact
    High speed pulse
    counting
    4DO
    SINK
    High speed pulse
    output

     
    Protocol
    MQTT
    SNMP V1/V2
    Modbus RTU/Modbus TCP
     Interface
         Ethernet port
         RS-485 Serial port



     
                                                        

    Item Parameter Description
    Power Input voltage
    1. Models without AO: 9~36VDC
    2. Models with AO: 24~36VDC
    Power consumption Typical standby power consumption: ≤ 2W
    Power Output
    1. 1 channel
    2. Output voltage: 936V DC
    3. Output current: 1500mA@12V(MAX)
    Protection Reverse wiring prevention;
    ESD Air: 15KV; Surge: 4KV
    Ethernet Specification 1 x RJ45, 10M/100Mbps
    Protection ESD contact: 8KV, Surge: 4KV(10/1000us)
    Protocol Modbus RTU, Modbus TCP, MQTT
    Serial port QTY 1 x RS485
    Baud Rate 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 128000
    Data Bit 7, 8
    Parity Bit None, Even, Odd
    Stop Bit 0.5, 1, 1.5, 2
    Protocol Modbus RTU(slave), Modbus RTU(master)
    Protection ESD contact: 8KV  Surge: 4KV(8/20us)
    Digital input QTY 16 channel(Max)
    Type Support Wet contact(NPN, PNP) and Dry contact.
    Default: Wet contact
    Dry contact
    1. Close: Short circuit
    2. Open: Open circuits
    Wet contact
    1. Close: 10~30VDC
    2. Open: 0~3VDC
    Others Support DIN1 as a pulse counter: Support high-speed pulse and low-speed pulse mode, default high-speed pulse frequency is up to 700KHz, and the optional low-speed pulse frequency is up to 10KHz.
    Support DIN2~DIN12 as low-speed pulse counter: The anti-jitter time can be set from 1~2000ms, default is 1ms, and the corresponding pulse frequency is up to 1KHz.
    Isolated protection 2KVrms
    Sampling Rate 100Hz
    Digital output QTY 16 channels(Max)
    Type SINK
    Capacity 500mA per contact
    Overvoltage protection 50VDC
    Pulse output The first DO supports pulse output, pulse output frequency: 10Hz~300KHz
    Software Protocols IPV4, TCP/UDP, DNS, Modbus RTU, Modbus TCP, MQTT
    Protocol conversion Support Modbus TCP and RTU protocol conversion
    Support Modbus RTU to MQTT and Modbus TCP to MQTT
    Indicator light Power, Link, RS485_RXD, RS485_TXD, IO status
    User configuration PC software configuration, support WIN XP, WIN 7, WIN 8, WIN 10
    Map data bool: 300
    16bit: 300
    Login Package Support custom login package
    Heartbeat Package Support custom heartbeat package
    Environment Working -2070°C, 595%RH
    Storage -4085°C, 595%RH
    Others Case Metal
    Dimension 82mm×40mm×100mm
    Protection grade IP30
    Net Weight 450g
    Installation DIN rail mounted, Wall-mounted
    Description
    Digital Input/Output Modules
    The BLIIoT's wide range of digital I/O modules guarantees the right module for diverse applications.
    The input/output module M110 is used for controlling digital consumer like contactors, relays, pneumatic and hydraulic valves, as well as for reading digital signals of sensors or detectors. 
    The Digital I/O M110 comes with 4 digital inputs, 4 digital outputs, and Modbus I/O, Ethernet port. 
    4DI
    Wet/Dry contact
    High speed pulse
    counting
    4DO
    SINK
    High speed pulse
    output

     
    Protocol
    MQTT
    SNMP V1/V2
    Modbus RTU/Modbus TCP
     Interface
         Ethernet port
         RS-485 Serial port



     
                                                        

    introduction
    Features
    Specifications
    Item Parameter Description
    Power Input voltage
    1. Models without AO: 9~36VDC
    2. Models with AO: 24~36VDC
    Power consumption Typical standby power consumption: ≤ 2W
    Power Output
    1. 1 channel
    2. Output voltage: 936V DC
    3. Output current: 1500mA@12V(MAX)
    Protection Reverse wiring prevention;
    ESD Air: 15KV; Surge: 4KV
    Ethernet Specification 1 x RJ45, 10M/100Mbps
    Protection ESD contact: 8KV, Surge: 4KV(10/1000us)
    Protocol Modbus RTU, Modbus TCP, MQTT
    Serial port QTY 1 x RS485
    Baud Rate 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 128000
    Data Bit 7, 8
    Parity Bit None, Even, Odd
    Stop Bit 0.5, 1, 1.5, 2
    Protocol Modbus RTU(slave), Modbus RTU(master)
    Protection ESD contact: 8KV  Surge: 4KV(8/20us)
    Digital input QTY 16 channel(Max)
    Type Support Wet contact(NPN, PNP) and Dry contact.
    Default: Wet contact
    Dry contact
    1. Close: Short circuit
    2. Open: Open circuits
    Wet contact
    1. Close: 10~30VDC
    2. Open: 0~3VDC
    Others Support DIN1 as a pulse counter: Support high-speed pulse and low-speed pulse mode, default high-speed pulse frequency is up to 700KHz, and the optional low-speed pulse frequency is up to 10KHz.
    Support DIN2~DIN12 as low-speed pulse counter: The anti-jitter time can be set from 1~2000ms, default is 1ms, and the corresponding pulse frequency is up to 1KHz.
    Isolated protection 2KVrms
    Sampling Rate 100Hz
    Digital output QTY 16 channels(Max)
    Type SINK
    Capacity 500mA per contact
    Overvoltage protection 50VDC
    Pulse output The first DO supports pulse output, pulse output frequency: 10Hz~300KHz
    Software Protocols IPV4, TCP/UDP, DNS, Modbus RTU, Modbus TCP, MQTT
    Protocol conversion Support Modbus TCP and RTU protocol conversion
    Support Modbus RTU to MQTT and Modbus TCP to MQTT
    Indicator light Power, Link, RS485_RXD, RS485_TXD, IO status
    User configuration PC software configuration, support WIN XP, WIN 7, WIN 8, WIN 10
    Map data bool: 300
    16bit: 300
    Login Package Support custom login package
    Heartbeat Package Support custom heartbeat package
    Environment Working -2070°C, 595%RH
    Storage -4085°C, 595%RH
    Others Case Metal
    Dimension 82mm×40mm×100mm
    Protection grade IP30
    Net Weight 450g
    Installation DIN rail mounted, Wall-mounted
    Download
    Applications

    Review